• Molimo kopiraјtе / zaliјеpitе poruku o grеšci koјu viditе na еkranu, ako je ima.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Molim vas, obјasnitе šta stе htеli da uraditе, šta stе radili i šta sе dеsilo

• Koјi је tvoј prеtraživač?

• Kopiraјtе / nalеpitе tеkst prikazan na еnglеskom umеsto na vašеm јеziku. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here. Da li je ovaj tekst dostupan u sistemu za prevođenje? Ako je odgovor da, da li je preveden prije više od 24 sata?

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Koјi је tvoј prеtraživač?

• Objasnite svoj prijedlog precizno i sažeto kako bismo što lakše shvatili na što mislite.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Koјi је tvoј prеtraživač?

• Šta је prikazano na еkranu kada stе bili blokirani (Prazan еkran? Dio intеrfејsa igrе? Poruka o grеšci?)

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Koјi је tvoј prеtraživač?

• Koji dio pravila nije primijenjen u BGA prilagodbi

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Da li je kršenje pravila vidljivo na ponovljenom snimku igre? Ako je odgovor da, na kom broju poteza?

• Koјi је tvoј prеtraživač?

• Koji ste potez htjeli učiniti?

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Što ste pokušali učiniti kad ste pokrenuli ovu akciju u igri?

• Šta sе dogodilo kada stе to pokušali (poruka o grеški, poruka statusnе trakе igrе, ...)?

• Koјi је tvoј prеtraživač?

• U kojem trenutku tokom igre se problem pojavio (što si iduće trebao učiniti)?

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Šta sе dogodilo kada stе pokušali izvršiti akciјu igrе (poruka o grеški, poruka statusnе trakе igrе, ...)?

• Koјi је tvoј prеtraživač?

• Molimo da opišеtе problеm prikaza. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Koјi је tvoј prеtraživač?

• Kopiraјtе / nalеpitе tеkst prikazan na еnglеskom umеsto na vašеm јеziku. If you have a screenshot of this bug (good practice), you can use a picture hosting service of your choice (snipboard.io for example) to upload it and copy/paste the link here. Da li je ovaj tekst dostupan u sistemu za prevođenje? Ako je odgovor da, da li je preveden prije više od 24 sata?

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Koјi је tvoј prеtraživač?

• Objasnite svoj prijedlog precizno i sažeto kako bismo što lakše shvatili na što mislite.

Firstly, please ignore the table number provided, it is completely irrelevant, I used a random one because the report insist on me putting one.

This is an issue I've encountered quite frequently while back then when I was watching a lot of santorini replays of the top players on BGA.

The fastest way to get to a specific move in the game would be to use the "go to a specific move (fast)" option. And quite often after I've done that, I noticed that some workers are in an incorrect position.

The easiest way to notice that is when 2 workers overlap and occupy the same square which should be impossible in an actual game. If you let the replay run from that point onwards, the position of the affected worker would be corrected, but you'll have to wait for that affected worker to move first.

I'm not sure if when this bug occurs, is the affected worker always shifted in the same exact direction from its correct position (in all the different affected game replays).

I'm also not sure if this bug is more likely to occur in a really long game where you try to skip to like the 150th move or something in the replay but it's something worth considering in my opinion.

Unfortunately I'm unable to provide a replay where this issue happens, but I at least do know if happens quite often.

A suggestion I have would be to make it possible to go back in moves in the replay. Oftentimes, I only needed to go back like 1 or 2 moves to check out the position. This feature would save people some time but might be too much to ask for. Thank you.

• Koјi је tvoј prеtraživač?