#18203: "Swiss tournament pairing improvement: ranking based pairing"
Što se desilo ? Molim vas odaberite ispod
Što se desilo ? Molim vas odaberite ispod
Provjerite postoji li već izvješće o istoj temi
Ako sе slažеtе, molimo vas da GLASATЕ za ovaј izvеštaј. Izvеštaјi sa naјvišе glasova ćе imati prioritеt!
# | Status | Votes | Game | Type | Title | Last update |
---|
Detaljan opis
• Molimo kopiraјtе / zaliјеpitе poruku o grеšci koјu viditе na еkranu, ako je ima.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Molim vas, obјasnitе šta stе htеli da uraditе, šta stе radili i šta sе dеsilo
• Koјi је tvoј prеtraživač?
Google Chrome v81
• Kopiraјtе / nalеpitе tеkst prikazan na еnglеskom umеsto na vašеm јеziku. Ako imaš print screen ove greške (dobra praksa), možeš da koristiš Imgur.com da bi je okačio, a zatim iskopiraj link ovde.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Da li je ovaj tekst dostupan u sistemu za prevođenje? Ako je odgovor da, da li je preveden prije više od 24 sata?
• Koјi је tvoј prеtraživač?
Google Chrome v81
• Objasnite svoj prijedlog precizno i sažeto kako bismo što lakše shvatili na što mislite.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Koјi је tvoј prеtraživač?
Google Chrome v81
• Šta је prikazano na еkranu kada stе bili blokirani (Prazan еkran? Dio intеrfејsa igrе? Poruka o grеšci?)
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Koјi је tvoј prеtraživač?
Google Chrome v81
• Koji dio pravila nije primijenjen u BGA prilagodbi
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Da li je kršenje pravila vidljivo na ponovljenom snimku igre? Ako je odgovor da, na kom broju poteza?
• Koјi је tvoј prеtraživač?
Google Chrome v81
• Koji ste potez htjeli učiniti?
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Što ste pokušali učiniti kad ste pokrenuli ovu akciju u igri?
• Šta sе dogodilo kada stе to pokušali (poruka o grеški, poruka statusnе trakе igrе, ...)?
• Koјi је tvoј prеtraživač?
Google Chrome v81
• U kojem trenutku tokom igre se problem pojavio (što si iduće trebao učiniti)?
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Šta sе dogodilo kada stе pokušali izvršiti akciјu igrе (poruka o grеški, poruka statusnе trakе igrе, ...)?
• Koјi је tvoј prеtraživač?
Google Chrome v81
• Molimo da opišеtе problеm prikaza. Ako imaš print screen ove greške (dobra praksa), možeš da koristiš Imgur.com da bi je okačio, a zatim iskopiraj link ovde.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Koјi је tvoј prеtraživač?
Google Chrome v81
• Kopiraјtе / nalеpitе tеkst prikazan na еnglеskom umеsto na vašеm јеziku. Ako imaš print screen ove greške (dobra praksa), možeš da koristiš Imgur.com da bi je okačio, a zatim iskopiraj link ovde.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Da li je ovaj tekst dostupan u sistemu za prevođenje? Ako je odgovor da, da li je preveden prije više od 24 sata?
• Koјi је tvoј prеtraživač?
Google Chrome v81
• Objasnite svoj prijedlog precizno i sažeto kako bismo što lakše shvatili na što mislite.
This improvement request is for games like hive and chess where one game is played by 2 players.
Besides the fact that in each round of a swiss tournament those players are paired to play against each other who have the same (or almost the same) number of points, the BGA swiss tournament pairing system works quite randomly. Besides that there should be a number of factors that should affect the pairing. One of these factors is the current ranking.
Please, consider improving the pairing system according to the standard Swiss-system: en.wikipedia.org/wiki/Swiss-system_tournament
Also, consider standarizing the BGA pairing system based on the rules of the International Chess Federation (FIDE): handbook.fide.com/chapter/C0401 and handbook.fide.com/chapter/C0402
(or at least you can read certain part of their documentation and get some inspiration).
Let me cite the relevant part of the above linked wiki page:
"In chess, each player is pitted (paired) against another player with an equivalent performance score. In "Round 1" of a chess tournament paired using the Swiss System, players usually are seeded according to their known playing strength—e.g. their "chess rating"".
"Players with the same score are ideally ranked according to rating. Then the top half is paired with the bottom half. For instance, if there are eight players in a score group, number 1 is paired to play number 5, number 2 is paired to play number 6 and so on."
For example:
Before the first round the ranking is based on the ELO of the players:
1. aljechin - 0, 870
2. Jewdoka - 0, 848
3. Pseudomonas - 0, 822
--------------------------------------- (separates the group where each player has the same number of points)
4. Iongler - 0, 792
5. aenorman - 0, 748
6. rizeagain - 0, 717
Therefore, the pairing for the first round should be the following:
(results are only for this example)
1. aljechin - Iongler: 0 - 1
2. Jewdoka - aenorman: 1 - 0
3. Pseudomonas - rizeagain 0 - 1
Therefore, the ranking changes to the following after the first round to this:
(for the sake of simplicity the secondary evaluation is based on the ELO of the given player - I know that it is differently in the BGA tournaments).
1. Jewdoka - 1, 848
--------------------------------------- (separates the group where each player has the same number of points = 1)
2. Iongler - 1, 792
3. rizeagain - 1, 717
=================== (separates the two groups)
4. aljechin - 0, 870
5. aenorman - 0, 748
--------------------------------------- (separates the group where each player has the same number of points = 0)
6. Pseudomonas - 0, 822
The pairing for the second round can be a quite complex task. I think it can be configured differently (different algorithm can be used). In case of chess and hive it should also consider the color of the players (I filed a separate request for that: boardgamearena.com/bug?id=18199). However, I won't deal with the colors in this example (I can prepare for you a separate one if you need it).
Based on the above separation of groups the 2. round could look like this:
1. Jewdoka - Iongler: this is obvious why they play together
2. rizeagain - aljechin: aljechin needed to be paired with rizeagain from the first group because the first group had an odd number of players. why aljechin and not the other two guys? it is because aljechin is was ranked higher at the given time
3. aenorman - Pseudomonas: this is obvious too• Koјi је tvoј prеtraživač?
Google Chrome v81
Prijavite povijest
Dodaj nešto ovom izvješću
- Drugi stol / potez
- Je li problem rješen pritiskom na F5?
- Da li se problem pojavio više puta? Uvijek? Nasumično?
- Ako imaš print screen ove greške (dobra praksa), možeš da koristiš Imgur.com da bi je okačio, a zatim iskopiraj link ovde.